| Subscriber Database |
Programming |
| Number of subscribers |
Up to 1,100. |
Type |
User friendly - menu driven. |
| Call record database |
Holds up to 1800 call records
per channel. |
| Local programming |
RS-232 serial port at
2400 Baud. |
| Output |
Programmable to serial port
printer. |
Remote programming |
1200 Baud modem. |
| Software required |
Any general communications |
| Time-date stamp |
Recorded by internal real time
clock. |
| Mobile activity timer |
1-255 seconds. |
| Call record |
Contains subscriber number,
time/date, number dialed, call duration, call type. |
Mobile answer timer |
1-255 seconds. |
| Custom log-on message |
Up to 20 characters. |
| Password |
6 digits. |
| Emergency telephone # |
Up to 15 digits. |
| Configuration file |
Can upload or download. |
Station I.D. |
Up to 20 characters. |
| |
| |
Other Specifications |
| Programmable
Subscriber Features |
Call types |
1. Mobile to landline. |
| Subscriber ID number |
1 to 5 digits in length. |
|
2. Landline to mobile. |
| Subscriber paging code |
High speed DTMF
signaling. |
|
3. Mobile to mobile. |
| |
4. Group call. |
| Call limit timer |
2.5 to 55 minutes per
subscriber. |
|
5. Operator/emergency call. |
| |
| Telephone line access |
Line 1 or line 1 and 2 per
subscriber. |
|
6. Priority call. |
| |
7. Fleet/Dispatch call. |
| Modes |
Half duplex, full duplex, group
call. |
Data retention |
EEPROM and internal battery
back-up. |
| |
| |
Front panel indicators |
Power, Carrier, Transmit,
Connect, Telco |
| Signaling
Specifications |
|
| Paging codes |
High Speed DTMF (VX Trunk I)
Digital BPSK (VX Trunk II, III). |
Rear panel connector |
DB-9 Serial Port, 14 position
terminal block, 2 RJ11-C, Telephone lines. |
| |
| Busy channel indicator |
CTCSS tone or carrier. |
Power |
10VDC to 20VDC @ 200mA. |
| |
|
| Radio Interface |
Temperature |
-25°C to +65°C. |
| PTT |
2 form C relay contact. |
Size |
19.0" x 6.25" x 1.75" rack
mountable. |
| Transmit audio |
0-3.0V pk-pk adjustable. |
|
| |
|
| CTCSS output |
0-3.0V pk-pk adjustable. |
*specifications
subject to change without notice |
| |
| Receiver audio |
25mV to 3.0V |
| Squelch |
Internal squelch circuit. |
| |
| Telephone Interface |
| Interface type |
Loop start (end to end). |
| Number of lines |
2 telephone line inputs. |
| Connection |
Via RJ11-C modular. |
| Regeneration |
Dial pulse or DTMF |
| Call progress tones |
Ring back, busy, beep. |
| Protection |
Lightning arrestors. |
| Telco decoding |
DTMF or rotary "dial click"
detector. |
| Ringer equivalence |
0.413 Ren. |
