| |||||||||||||
|
![]()
FIF-8
|
| FIF-8 | Firmware
Writer for
VX-600
VX-800 VX-900
VX-4000
VX-5500
VX-6000
(includes T9101518A adapter for VX-4000/5500/6000/600/ 800/900 multi-pin radios) (firmware included - specify model when ordering) (requires PA-23B AC Adapter below or similar) (may require other adapter cables depending on radio model - see below) |
|
| CT-92 |
Firmware
Writer Cable used with
FIF-8 above (for VX-2500/3200/4100/4200 RJ-45 Jack radios) (firmware included - specify model when ordering) VX-2500 VX-3200 VX-4100 VX-4200 |
|
| CT-110 |
Firmware
Writer Cable used with
FIF-8 above (for VX-820/920 radios) (firmware included - specify model when ordering) VX-820 VX-920 |
|
| T9207105 |
Firmware
Writer Cable used with
FIF-8 above (for VX-410/420 radios) (firmware included - specify model when ordering) VX-410 VX-420 |
|
| CT-88 | Mobile radio DB25 accessory port to FIF-8 box interfaced cable used for alignment of VX-4000 VX-5500 VX-6000 | |
| PA-23B |
AC Adapter for FIF-8 Firmware Writer (120 VAC input) |
Note: The FIF-8 provides the necessary voltage conversion to allow re-programming/upgrading of the internal flash ROM on chip firmware of the Vertex Standard VX-800, VX-600, VX-900, VX-4000, VX-5500 and VX-6000 transceivers from the serial port of a personal computer. Any regulated DC power supply (15 -18 VDC 1A max) can be used for the FIF-8 in place of the PA-21 or PA-23 AC adapter. Be sure to use the Correct Polarity when making connections: the center pin of the power Jack is positive (•) if you're not using the PA-23B adapter.