|
| |
Vertex Standard
HF SSB/AM/CW/DATA
Portable Transceiver
VX-1210
COMMERCIAL
GRADE
HF MANPACK MULTI-MODE RADIO
500 Channels / 25 Watts PEP
Specifications:
|
|
|
General Specifications |
VX-1210 |
|
Number of Channels:
|
500 Channels |
|
Frequency Range TX:
|
1.6 - 30 MHz |
|
Frequency Range RX:
|
0.5 - 30 MHz |
|
Emission Type:
|
AlA(CW), J3E(LSB/USB), H3E(AM), F1B(AFSK) |
|
Channel Spacing:
|
10 Hz |
|
Power Requirements:
|
DC 14.4 V Lithium-ion Battery |
|
Frequency Stability:
|
±1.0 ppm |
|
Display Type:
|
Liquid-Crystal (LCD), with Illumination |
|
Recharge Time:
|
5 Hours (Typical) |
| Current Consumption: |
RX: 500 mA (Saver off), 100 mA (Saver on)
TX: 5 A (20 W), 3 A (5 W)
|
| Case size (w/o knobs): |
7.6"(W) x 2.9"(H) x 10.8"(D) (193 x 74 x 274 mm)
|
| Temperature Range: |
-22° F to +140° F (-30° C to +60° C)
|
| RF Input-Output Impedance: |
50 Ohms |
| Weight (approx.): |
7.1 lbs. (3.2 kg) w/FNB-66LI Lithium-ion Battery |
| Receiver Specifications |
Measurements made per EIA standard TIA/EIA-603 |
| Circuit Type: |
Double Conversion Superheterodyne |
| Intermediate Frequency: |
47.055 MHz & 10.7 MHz
|
| Sensitivity: |
0.25 uV (J3E/A1A, 10 dB S/N)
|
| Selectivity: |
2.4 KHz/5.0 KHz (-6 /-60 dB) |
| IF Rejection: |
80 dB |
| Image Rejection: |
80 dB |
| Clarifier Adjustment Range: |
±200 Hz (J3E/AlA/F1 B), ±400 Hz (H3E) |
| Audio Output: |
At least 1.5 W into 4 Ohms @ 10% THD |
| Audio Impedance: |
4 - 32 Ohms |
| Transmitter Specifications |
Measurement made per EIA standard TIA/EIA-603 |
| Power Output: |
25W / 5W (J3E/A1 A/F1 B), 10W / 2.5W (H3E) |
| Duty Cycle: |
25 % Voice |
| Modulation Type: |
Balanced Modulator (SSB:J3E)
Early Stage/Low Level (AM:H3E) |
| Spurious Emission: |
-56 dB or better |
| Carrier Suppression: |
55 dB |
| Undesired Sideband Suppression: |
55 dB @ 1.5 kHz tone |
| Audio Response (J3E): |
350 - 2650 Hz (-6 dB) |
| 3rd-order IMD: |
-31 dB |
| Microphone Impedance: |
2 k Ohms, condenser type |
| Applicable MIL-STD |
MIL-STD 810D Method/Procedure MIL-STD 810E Method/Procedure |
| Vibration: |
514.3/Procedure 1, Cat. 10 |
514.4/Procedure 1, Cat. 10 |
| Shock: |
516.3/Procedure 1 |
516.4/Procedure 1 |
RETURN TO MAIN PAGE
Specifications are subject to change without notice or obligation.
territorial
restrictions
|
|
