|
| |
Vertex Standard
VHF/UHF Portable
Two-Way Radio
VX-410
Series
VX-414 VX-417
Rugged,
Durable Portables
32 Channel 5 Watt
Specifications
|
RETURN TO MAIN PAGE |
|
|
General Specifications |
VX-410 Series VHF
|
VX-410 Series UHF
|
|
Number of Channels
|
32 (16 Channels x 2 Banks) |
|
Frequency Range
|
148-174 MHz (C) |
450-490 MHz (D) |
|
Channel Spacing
|
25/20/12.5 KHz |
|
PLL Steps
|
2.5/6.25 KHz |
12.5/25 KHz |
|
Power Supply Voltage
|
7.5 VDC ± 20 % |
| Battery Life (5-5-90 duty) |
w/FNB-V67LI (1600mAh):
10hrs. (13hrs. w/saver)
w/FNB-V57 (1100mAh):
7hrs, (8.8hrs w/saver)
|
WIFNB-V67LI (1600mAh):
9.5hrs. (12hrs. w/saver)
w/FNB-V57 (1100mAh):
6.5hrs. (8hrs. w/saver) |
| Operating Temperature Range |
-22° F to +140° F (-30° C to +60° C)
|
| Frequency Stability |
±2.5 ppm
|
| Dimensions |
2.3"(W) x 4.3"(H) x 1.2"(D) (58 x 108.5
x 30mm) |
| Weight |
10.6 oz. (300 g) w/FNB-67LI |
| Receiver Specifications |
Measurements made per EIA standard TIA/EIA-603 |
| IFs |
50.85 MHz & 450 KHz |
| Circuit Type |
Double-conversion superheterodyne |
Sensitivity
EIA 12 dB SINAD |
< 0.25 uv |
| Squelch Sensitivity |
< 0.20 uv |
| Adjacent Channel
Selectivity |
> 70 dB (25/20 KHz) / > 65 dB (12.5 KHz) |
| Intermodulation |
> 70 dB |
| Spurious Rejection |
> 70 dB |
| Image Rejection |
> 70 dB |
| Hum & Noise |
> 45 dB |
| Audio Output |
.5 W @ 4 Ohms, 5 % THD |
| Transmitter Specifications |
Measurement made per EIA standard TIA/EIA-603 |
| Power Output |
5.0/1.0 Watts |
| Frequency Stability |
better than ±2.5 ppm |
| Modulation |
Direct FM 16K0F3E, 11K0F3E |
| Maximum Deviation |
±2.5 KHz (12.5 KHz) / ±5.0 KHz (25 KHz) |
| Conducted Spurious Emissions |
> 70 dB Below Carrier |
| FM Hum & Noise |
> 45 dB (25 KHz) |
| Audio Distortion (@ 1 KHz) |
< 3% |
| Microphone Type |
2-k Ohms condenser |
Measurements per EIA standards unless noted above. Specifications subject to change without notice or obligation.
|
APPLICABLE MIL-STD
|
|
Standard
|
MIL 810D
Methods/Procedures |
MIL 810E
Methods/Procedures
|
MIL 810F
Methods/Procedures |
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Rain
Humidity
Salt Fog
Dust
Vibration
Shock |
500.2/Procedure 1,
2
501.2/Procedure 1, 2
502.2/Procedure 2
505.2/Procedure 1
506.2/Procedure 1, 2
507.2/Procedure 2, 3
509.2/Procedure 1
510.2/Procedure 1
514.3/Procedure Cat. 10
516.3/Procedure 1, 4 |
500.3/Procedure 1,
2
501.3/Procedure 1, 2
502.3/Procedure 1, 2
505.3/Procedure 1
506.3/Procedure 1, 2
507.3/Procedure 2, 3
509.3/Procedure 1
510.3/Procedure 1
514.4/Procedure Cat. 10
516.4/Procedure 1, 4 |
500.4/Procedure 1,
2
501.4/Procedure 1, 2
502.4/Procedure 1, 2
505.4/Procedure 1, 2
506.4/Procedure 1, 3
507.4/Procedure 1
509.4/Procedure 1
510.4/Procedure 1, 3
514.5/Procedure Cat. 10
516.5/Procedure 1, 4 |
|
Intrinsically Safe Approvals
The VX-410/420 VHF and UHF models have been given an
intrinsically safe rating for use in ANSI/UL-913-88 Class 1,11, and III,
Division 1, Groups A, B, C, D, E, F, and G hazardous environments on
models equipped with the Intrinsically Safe option. |
RETURN
TO MAIN PAGE
Territorial
restrictions
|
