|
| |
Vertex
Standard
Air-Band Aircraft Portable
VHF AM Two-Way Radio
VXA-150
Pro V
INTRODUCING PROFESSIONAL-
GRADE EQUIPMENT FOR AIR-BAND
150 Channels / 5 Watts
|
|
| Specifications: |
|
|
General Specifications |
VXA-150 |
|
Number of Channels
|
150 Channels |
|
Frequency Range TX
|
118.000 - 136.975
MHz |
|
Frequency Range RX
|
108.000 - 136.975 MHz |
|
Frequency Range WX
|
(WX-01 - WX-10) : USA version only |
|
Channel Spacing
|
25 KHz |
|
Emission Type TX:
|
AM |
|
Emission Type RX:
|
AM & FM |
|
Power Supply
Voltage
|
6.0 - 15.0 VDC |
| Current Consumption (approx.) |
< 1 uA (power off)
17 mA (battery saver on, saver ratio 1:5)
47 mA (squelch on), 180 mA (receive)
1 A (transmit 1.5 W Carrier)
|
| Ambient Temperature Range |
+14° F to + 140° F (-10° C to + 60° C)
|
| RF Input-Output Impedance |
50 Ohms |
| Dimensions |
(WxHxD): 2.3" x 4.3" x 1.0" w/FNB-64
(58 x 108.5 x 26.5 mm) |
| Weight (approx.) |
12 oz (340 g) with FNB-64, antenna, and belt clip |
| Receiver Specifications |
Measurements made per EIA standard TIA/EIA-603 |
| Circuit Type |
Double Conversion Super-heterodyne |
| Sensitivity |
< 0.8 u V (for 6 dB S/N with 1 kHz, 30 % modulation) |
| Selectivity
|
< 8 kHz/-6 dB |
| Adjacent Channel Selectivity |
< 25 kHz/-60 dB |
| Audio Output |
AF Output (@7.2 V): 0.4 W @ 8 Ohms, 10 % THD |
| Transmitter Specifications |
Measurement made per EIA standard TIA/EIA-603 |
| Power Output |
(@7.2 V): 5.0 W PEP / 1.5 W (Carrier Power) |
| Frequency Stability |
Better than ±10 ppm (+14 °F to +140 °F) |
| Modulation System |
Low Level Amplitude Modulation |
| Spurious Emission |
> 60 dB below carrier |
| Int. Microphone Type |
Condenser |
| Ext. Mic Impedance |
150 Ohms |
RETURN TO MAIN PAGE
Specifications are subject to change without notice or obligation. |
