DSUB 25-PIN ACCESSORY CONNECTOR ON REAR PANEL
For convenient interfacing to external
controllers or other accessories, the rear-panel DSUB 25-Pin Accessory
Jack provides access to important repeater circuitry without the need for
a specialized connector
PROGRAMMABLE MESSAGE BANKS
Enter date, subject, and notes such as programming or service memos, for
recall at any time in the future.
SELECTABLE ENCRYPTION OPTIONS
The VXR-9000 may be set up for either rolling code or inversion-type
encryption (optional module required). The security required by your
customer is available for easy installation.
FIVE-STEP AUTOMATIC COMMAND SEQUENCE
During certain operating events (such as Startup, switch from
main DC to backup DC, etc.) the VXR-9000 may be programmed to undertake an
automatic sequence of commands, so it can be configured for the particular
event. For example, if DC fails and the repeater switches to emergency DC,
the repeater can be set up to switch to Low Power, send a CW ID advising
of the DC power situation, and other auto-command sequences, as well.
TWO-TONE DECODE STARTUP
The VXR-9000 may be booted up using two-tone commands. Four
popular two-tone formats are supported, and the precise frequencies of
each of the two tones may be manually adjusted from 100 Hz to 5 kHz, in
0.1 Hz steps.
INTELLIGENT FAN OPERATION
The built in fan has a malfunction detect output to alert you
if should ever fail due to obstruction, mechanical or electrical failure.