Ferret multiband base antenna by Austin Antenna
Options and Accessories: Please scroll down to view related items.
Note: Main Image is similar, actual item may look different.
Austin Ferret 202700
The Ultimate Omnidirectional Multiband Station Antenna the Ferret is a Multiband Antenna utilizing state of the art engineering techniques. The Austin Ferret provides coverage from 25 MHz to1.8 GHz. The configuration is an array of center fed 1/2 wave elements. Utilization of dielectrically tuned chokes, multi-tuned parallel resonant circuits and asymmetrical elements provides tuned transmit quality on band centers of 40, 100, 122, 146, 155, 315, 465, 865 and 1280 MHz. The Austin Ferret can handle transmit power levels of 100 watts.
The Austin Ferret is housed in a neat, lightweight, fiberglass radome and is light gray CPVC smooth finish UV resistant chlorinated polyvinyl chloride. An aluminum mounting tube is provided for simple installation to mast or side mounting brackets [not supplied]. Mounting to the support mast can be accomplished with U-bolts or high quality stainless steel hose clamps (usually three works best). Be careful not to overlap the antenna with the support mast and don't over-tighten and crush the aluminum tube (replacement tubes available). NOTE: 40/100/122/146/155/315/465/865/1280 MHZ ARE BAND CENTERS - WILL RECEIVE OVER MUCH WIDER RANGE
NOTE: THE FERRET ANTENNA IS A NON-RETURNABLE ITEM
NOTE: MOST AUSTIN PRODUCTS ARE BUILT ON ORDER
PLEASE ALLOW 4-6 WEEKS TO SHIP (USUALLY MUCH LESS)
WARNING! UPS OVERSIZE SHIPPING CHARGE DUE TO LENGTH - GROUND SHIPPING BEST
NOTE: IF ORDERING MORE THAN 2 ANTENNAS PLEASE ASK FOR A SHIPPING QUOTE FIRST
To provide maximum performance at the higher UHF frequencies the Austin Ferret is terminated with an N-Type Female connector.
The Ferret can be modified on a custom basis to cover most special frequency requirements.
Use the highest quality coax cable you can afford to connect your antenna to your radio (minimum quality would be LMR-400 or equivalent). Use high quality silver plated connectors. You should consider having your cable made professionally if you are not skilled at assembling and soldering connectors. Use a string to run the distance first and add a few extra feet just in case. Keeping the cable as short as possible greatly improves performance. Often overlooked is antenna grounding. For lightning protection and safety be sure and run a heavy (#10 or #8) ground wire from the metal mounting bracket to a 6-8 foot ground rod using the shortest distance possible.
- 25-1800 MHZ in 9 Band Ranges 40/100/122/146/155/315/465/865/1280 MHz
- Ultimate Base Antenna for Scanning, Amateur and Commercial Use
- Transmit capable (100 Watts)
- Light weight and rugged CPVC Radome
- Industry standard N-Female connector
- Small footprint and wind loading
- Does not require ground plane
- Omnidirectional pattern perfect for scanning
- Support Tube Included with antenna - 202705
- Will Receive well outside stated band ranges (receive only)
- One year warranty on materials and workmanship
- Call for Assistance
- Pay using PayPal: no PayPal account needed
| Support Tube
Slides over Antenna Base to mount antenna to support
14 3/8" x 1-1/8"
(Tube OD 1.125" / Wall 0.058") included with antenna.
|ANTENNA NAME||Ferret 9-Band Omni Base 40/100/122/146/155/315/465/865/1280 MHz|
|ANTENNA TYPE||Multiband array of center fed 1/2 wave elements gnd Independent|
|DESCRIPTION||Antenna configuration is an array of center fed 1/2 wave elements. Utilization of dielectrically tuned chokes, multi-tuned parallel resonant circuits and asymmetrical elements.|
Low VSWR centers at 40/100/122/146/155/315/465/865/1280 MHz
|POWER RATING||100 Watts|
0 dBi on all bands.|
|VSWR BANDWIDTH||Approx 2 @ 40 MHz, 10 @ 155MHz, 15 @ 465 MHz, 90 @ 865MHz|
N-female silver plated|
|SIZE INCHES||Approx Assembled Length 96" (8 ft)|
|Input Impedance||50 ohms|
|Overall Assembled Length||96" (8 ft)|
|Main Mast Length||84 1/2"|
|Main Mast Diameter||1-1/8"|
|Base Aluminum Support Tube||14 3/8"|
|Base Support Tube diameter||1-1/8"|
|Approximate Shipping Tube dimensions||106" x 3" x 3"|
|Approximate Antenna Weight||3.3 lbs|
|Wind Survival||110+ mph|
|Radome Color (main body)||Light Gray CPVC Smooth Finish (UV resistant chlorinated polyvinyl chloride)|
|Connector Type||N Female|
NOTE: Features, prices and specifications subject to change without notice. Technical Specifications/Data may be approximate in some cases and can change without notice. Not responsible for typographical or technical errors, information presented is for general evaluation only.
Austin Ferret - 202700 25 MHz to 1.8 GHz Multiband Scanner/2-Way/Amateur Super Base Antenna
- Brands Austin Antenna
- Product Code: 202700
- Availability: Austin Factory build & ship on order - Allow 2-4 weeks (usually less - Note: UPS oversize shipping due to length) ...